Batshit crazy suicidal death-cult shit.

Zipper merging also always seems to assume that there are no trucks/buses/trailers and that everyone isn’t tailgating so closely that they can read the Vin# of the car in front of them…

I was referring to the waveyness in the center, though the warping on the esges is partly caused by both the oils and the cooling shrinkage, I believe.

The uniform buckling of the layer in the middle of the sheet is what I’m leaning on, but I don’t believe that your fan speed is too high, or there would be more seperation between layers as the filament would cool too much before adhering to the layer below.

I believe there are test STLs that assist in Dialing in your settings for printing plates in particular, but I’m avoiding printing surfaces that large until I get an enclosure built.

I’d say your print time per layer might be too high, aince the filament looks to be contracting off of the plate as it cools. I’d see if there was a way to speed-up the print time of each layer, or break up the plate’s large surface area with holes or other features to dissapate the stress as it cools.

“Dicks out for Jesus Any%” runs, when?

It’s a Chiaotzu!

https://youtu.be/g4GUq60CNeI?t=17

Nothing says “Death Cult” quite like the prominant display of the murder weapon used against their leader.

It’s almost like it’s a suicidal death-cult.

I mean, the Israelis kind of had something similar for a bunch of pagers, but instead of bricking the device, they just violently exploded.

I think they should add the word “Fuck” to all age verification prompts until they, too, get censored.

If the insurance firm has a lot of money to throw at constant adds, then odds are good that they aren’t paying out premiums for their customers.

They were always sacrificial pawns. The administration has been salivating over one of them getting killed so that they can invoke Artical 2 and call for martial law.

Text has been a little sluggish with my tests. Might be due to influx of users, though.

Hate week is a time-honored tradition!

You laugh, but the engineroom guys refer to the reactor as a “Hot-rock” diety.

The one that upped it by 30% worked for me on a Steam Deck. I can’t parry everything, but i can at least hit the parry now.

Just spit balling here, but they probably tune the AI for different thresholds between return and rent out so that they can rake in the damage fees for things that “weren’t there” during the first AI scan.

Wouldn’t be the first time, if true.

Good though they cut finding to that, too, then.