It’s the same for my old QQS-pro though. Even after some mods, it still just works. Upgrades are clear but not necessary.

TIL. Thanks.

Looks like there’s a difference in using it with or without a capital (scanning some online sources). https://www.languagehumanities.org/what-is-the-difference-between-a-state-nation-and-country.htm indicates it should be written with a capital but even then I would not have known. That might be an LLM hallucination, if it is not then my comment could be correct.

Why not use the only accepted country though? As a non-native speaker coming from an EU country it feels derogative.

It’s about France, Spain, Italy, Denmark and Greece. These are countries, not states.

We have a few Tuxedo computers and some other Linux brands at our company and are generally happy about them. Cheaper devices have a less than perfect keyboard (though I liked the one on the slimbook) a worse camera and microphone (though some are very ok).

I’m very happy with these Linux devices. The few makes for which we needed parts also supplied them but sending the device their way for repair took longer than we’d have wanted.

Cool! This was interesting to see.

On the design: It looks like it could be good for laser cutting but I doubt it will do more than CNC engraving wood. Would love to be proven wrong. I think the screws are too close and the leverages too large to be solid enough for cutting. We cpuld simulate it to verify the weak spots. No problem for plotting and laser cutting though. I was surprised by the deflection of the Indymill which has more metal parts.

On the CAD file: I could easily find my way in the file. I generally constrain more (also importing shapes from other Bodies) which makes it more automatic but also more error prone and harder to calculate. It will be interesting to see an assembly of these parts too.

Looking forward to updates from this build.

I’d like to see the FreeCAD file both in the “a bit messy” form as well as in the cleaned up form.

The post title says “ever” rather than “2025”. It’s cool for 2025 and we may get some interesting others, but many here will have ran it on something slower at some point.

You can manually edit the gcode to see if printing white first works out better. Then search for a more repeatable solution if you often re-slice.

Manipulating gcode looks intimidating the first time but it’s really not that crazy. Cura adds comments to the gcode and you can look up the codes otherwise, I expect Pusa Slicer to do the same. You want to move the whole printing sequence of the white nozzle before the printing sequence of the second black one on the first layer. Keep the setup (heating etc) before that.

We run Taiga and it seems to work fine.

If you want to link to external sources in a structured way and you don’t mind tweaking the looks, SolidOS (ot another SOLID app) has a task list/tracker.

I keep my personal tasks in org-mode or org-roam.

Oh I feel you. Typing too much too fast is terrible on the wrists.

I remapped some keys for the key combos and have no issues with those now. Regardless of editor, good posture may help. I find good posture easier with split keyboards which often include a thumb cluster.

Perhaps multi-modal editing is better and you can do that with evil-mode. I’ve created some prefix key combinations with Alt-Gr and with the super (windows) keys to create something like it whilst keeping most most common commands close to the default. Namely C-x is now s-c which is way more relaxing on Dvorak layout.

Doom Emacs includes evil-mode by default perhaps that’s your cup of tea.

That would be Emacs.

Emacs is like an operating system bringing various tools into the same editing interface, including email. Emacs is very adaptive, you can get VIm like bindings through evil-mode.

I own this. It is horrible. If the specs were real it would be great, but the specs are not real. It is a 3k black and white monitor with a fixed color filter over it. That means you need 3x3 pixels to resemble a color.

I consider it a scam from Dasung.

Boox on the other hand made a sane black and white display. Much better. I own a Max 2 Pro. Sadly they fail to understand that when you report a display as 20px smaller than it really is over an HDMI port and then rescale the image of the computer display on that, that it becomes really uncrisp. Their suggestion is to use the display with 200% scaling (so you don’t notice as much I suppose).

Epaper is really promising and nice. However both of these companies should either get some real competition or lawsuits.

Depends on the use.

The screen protector serves as a blue light filter too, it’s cheaper than a display, and fairly thin. That’s a straightforward addition for my use but if you don’t have issues with your phone dropping then you could certainly do without.

I very much dislike cases and loved the PH-1 for stating that a phone should be solid enough without a case (sadly it did not survive a 50cm drop on a floor so it did not hold up in practice). If you don’t have much issues with your phone dropping then not having a case makes it so much nicer.

I take more risk holding my phone than I should which means it falls more than average. The price I have to pay is a screen protector and cover. Replacing the display should be easy, but it’d also be wasteful.

I had to replace parts on my FP5. It fell on very bad asphalt at speed whilst cycling in a foreign country. The glass on the camera modules scattered. Display protector broke and the case got some good damage. I was instantly calmed realising it is a FairPhone and knowing I could order replacement parts.

Repairs were trivial and it feels good to have created just a tiny amount of e-waste instead of a large amount. The black aluminium case has some war wounds (scratches) reminding me of the trip.

Answer: they’re holding up just fine

I grew up online and there are people I’ve never met in person whom I can work with no problem. I have never had the need to see someone in person for work myself, but the click isn’t there for everyone.

I dislike generational thinking and this argument seems to play on those lines; I have seen some people working better remote and some working better partially in person regardless of their generation or background. Younger people are more fluent in working remotely but not everyone wants that full-time and sometimes it doesn’t work out too well either. Often working in the office is the worst so let’s make/keep remote the default.

My personal opinion is that we should do everything online which can be online and that people who need to work in person should do their best to cater for working online. It helps with climate and can help work/life balance.

Any form of communication gap is a shared gap. Both sides have to cater to make the conversation work. If OP needs face-to-face then that must be taken into account. If you want that conversation to happen you’d better care for their needs as much as they’ll care for yours. OP may have extensive experience in working with people and may have seen this need on their own end and likely on the other end too. Perhaps even only on the other end. On the spectrum of cooperation I’m sure there will be cases where it helps and perhaps even be necessary. I believe it’s a small subset of situations.

By all means, try to stay constructive and learn from others. Whatever they have learned in the past likely applies to our new ways in another form. I would like it if we could keep improving remote.