Hey guys I am new here but I wanted to ask and get an opinion on this as we aren’t very handy ourselves.

My fiancée and I are finishing a lofted apartment area above a garage. We hired a family friend’s husband as our contractor and so far we haven’t made it far into the process.

He has torn down the old deck and put up a new extended one, which looks okay from what I can tell. However there are a few points on the stairs, especially the bottom step, that have splits in the wood. I am concerned that this may lead to loose boards or repairs needed later on.

Based on my one wood shop class in high school, I didn’t think this looked good, but like I said I am not very handy so I want a second opinion. Is this something I should have them fix or is this to be expected?

Update:

They are working to replace the busted stringers. I still don’t know who did that work exactly, but it sounds like it was a worker without our contractors supervision. Still not sure why they put the screws in the way they did, but hopefully it’ll be done right the second time. It also sounds like they will be anchoring the stringers to the ground when this it is done, which some people were also commented about.

To clarify, when I said apartment, I mostly meant in the size/layout. This will still be my personal residence so I will not be renting this to someone else, nor would I consider it based on the workmanship before I brought this issue up.

Thanks to everybody who responded and I might update this again if depending on how the fix turns out.

  • givesomefucks@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    6 days ago

    It honestly might be AI?

    Like the top pic and the bottom pic don’t add up. Either the pictures are of two different attempts or neither are actually real…

    I have no idea why OP would bother faking it tho.

    But the top pic only has the sideways screw on the left, the bottom pic has it on the middle. Unless OP did it himself and the top pic is before they put in the middle screw?

    It’s just all around weird

    Quick edit:

    The wood grain on the middle edge flips…

    If it’s not AI then it’s two attempts complete with different runners.

    • BassTurd@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      6 days ago

      Picture two has stringers 1 and 2 and picture 3 is the third stringer. The grain lines up correct per picture 1.

    • Y33tMaster69@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      5 days ago

      Hey, its not AI, I am just a total amateur and I only grabbed a few pictures. The first and third stringers from the left have splitting occurring, although both have a screw going in diagonally that seems to have caused the splitting.

      While I am here, I’ll go ahead and say fuck AI, and thanks for being skeptical :)

    • Vanth@reddthat.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      6 days ago

      Yeah, I wondered that briefly as well. One reason I didn’t bother to elaborate on the problems, if it is an AI image I’m not going to help train it.